If you like your music loud and clear, Rockford Fosgate designed their Power Series T-4652-S 6-1/2" component system for you. These speakers can handle up to 150 watts RMS, which means you can crank this system for hours without a worry. The woofer features a cone made from woven Liquid Crystal Polymer fibers, with a special-design butyl rubber surround that gives you more cone area without increasing the size of the basket. Translation? You'll hear deeper, richer lows than you would from most speakers of this size.
The 1" LCP fiber ring radiator tweeter features an aluminum phase plug to give high notes the perfect sparkle in your car. Rockford Fosgate uses superior components to create a crossover network that eliminates the "hot spots" and dropouts caused by inferior crossovers. You'll find a nice selection of customization options, including three selectable tweeter levels, selectable bi-amp switching, and on/off axis settings.
Easier installation
Rockford Fosgate has simplified installation on all fronts. FlexFit slot woofer mounting makes it easier to install these speakers in case the factory holes are slightly off. And Discreet Dual Clamp tweeter mounting hardware makes it easier to install your tweeters in flush-mount applications.
All told, this Power Series system will enhance your driving experience for years to come.
Rockford Fosgate T-4652-S
- 2-way component speaker system includes two woofers, two tweeters, and two external crossovers
- 6-1/2" Liquid Crystal Polymer fiber woofer cone with VAST butyl surround
- 1" Liquid Crystal Polymer ring radiator tweeter with aluminum phase plug
- 2-way external crossover with 3-level tweeter adjustment
- CEA-compliant
- power range: 38-150 watts RMS (300 watts peak)
- sensitivity: 89 dB
- frequency response: 40-30000 Hz
- impedance: 4 ohms
- woofer mounting depth: 2.8"
- mounting hardware included
- grilles included
- warranty: 1 year
Rockford Fosgate T-4652-S owner's manual
- Two Woofers
- 2 Woofer grilles
- Two 1" Tweeters (with attached 6" wires)
- 2 Tweeter trim rings
- 2 Flush mount top tweeter clamps
- 2 Flush mount rear tweeter clamps
- 2 Angled surface mount tweeter housings
- 2 Crossovers
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Two M4 nuts
- 2 Split lock washers
- Eight 1-3/4" Allen head screws
- Sixteen 1" Allen head screws
- 3mm Allen head bit
- 2mm Allen wrench
- Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)